# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0007 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 066 - calculated from the manual values
#
ED 411.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   11.1 3.0289e-003  1.52
ED 442.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   9.0 3.3417e-003  1.44
ED 490.5 'uW/cm^2/nm' 2 BU 1 OPTIC2
   26.0 3.0670e-003  1.43
ED 510.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   18.0 3.1433e-003  1.42
ED 554.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   29.0 3.5324e-003  1.39
ED 666.0 'uW/cm^2/nm' 2 BU 1 OPTIC2
   19.0 2.2049e-003  1.40
ED 683.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   22.2 2.2202e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT