# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0007 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 066 - calculated from the manual values
#
ED 411.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   11.8 2.9610e-003  1.52
ED 442.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   16.4 3.2341e-003  1.44
ED 490.5 'uW/cm^2/nm' 2 BU 1 OPTIC2
   17.4 2.9442e-003  1.43
ED 510.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   13.9 3.0525e-003  1.42
ED 554.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   17.8 3.4462e-003  1.39
ED 666.0 'uW/cm^2/nm' 2 BU 1 OPTIC2
   8.9 2.1317e-003  1.40
ED 683.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   18.6 2.3155e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT