# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0005 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 063 - calculated from the manual values 
#
ED 412.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   10.7 2.9755e-003  1.52
ED 443.2 'uW/cm^2/nm' 2 BU 1 OPTIC2
   4.1 3.4409e-003  1.44
ED 490.4 'uW/cm^2/nm' 2 BU 1 OPTIC2
   20.1 3.1204e-003  1.43
ED 510.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   14.0 3.6850e-003  1.42
ED 554.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   24.0 3.3035e-003  1.39
ED 665.7 'uW/cm^2/nm' 2 BU 1 OPTIC2
   20.1 2.1973e-003  1.40
ED 682.6 'uW/cm^2/nm' 2 BU 1 OPTIC2
   16.0 2.2278e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT