# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0004 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 062 - calculated from the manual values 
#
ED 411.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   11.4 3.0212e-003  1.52
ED 443.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   8.0 3.4409e-003  1.44
ED 490.0 'uW/cm^2/nm' 2 BU 1 OPTIC2
   22.0 3.1662e-003  1.43
ED 510.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   11.4 3.3569e-003  1.42
ED 554.2 'uW/cm^2/nm' 2 BU 1 OPTIC2
   17.3 3.5400e-003  1.39
ED 664.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   18.7 2.2354e-003  1.40
ED 683.0 'uW/cm^2/nm' 2 BU 1 OPTIC2
   14.2 2.1057e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT