# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0002 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 060 - calculated from the manual values 
#
ED 412.2 'uW/cm^2/nm' 2 BU 1 OPTIC2
   13.9 3.0052e-003  1.52
ED 443.2 'uW/cm^2/nm' 2 BU 1 OPTIC2
   10.2 3.1982e-003  1.44
ED 489.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   9.0 3.0632e-003  1.43
ED 700.3 'uW/cm^2/nm' 2 BU 1 OPTIC2
   16.4 2.3560e-003  1.36
ED 554.3 'uW/cm^2/nm' 2 BU 1 OPTIC2
   15.8 3.3363e-003  1.39
ED 665.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   14.9 2.1599e-003  1.40
ED 683.4 'uW/cm^2/nm' 2 BU 1 OPTIC2
   9.1 2.2255e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT