# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0006 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 057 - calculated from the manual values
#
ED 412.2 'uW/cm^2/nm' 2 BU 1 OPTIC2
   8.8 2.9510e-003  1.52
ED 442.5 'uW/cm^2/nm' 2 BU 1 OPTIC2
   12.7 3.0960e-003  1.44
ED 490.0 'uW/cm^2/nm' 2 BU 1 OPTIC2
   14.4 3.1776e-003  1.43
ED 700.2 'uW/cm^2/nm' 2 BU 1 OPTIC2
   11.4 2.22706e-003  1.36
ED 555.0 'uW/cm^2/nm' 2 BU 1 OPTIC2
   15.1 3.3051e-003  1.39
ED 665.7 'uW/cm^2/nm' 2 BU 1 OPTIC2
   10.2 2.1233e-003  1.40
ED 682.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   14.4 2.2041e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT