# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0009 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 055 - calculated from the manual values
#
ED 411.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   14.2 2.9282e-003  1.52
ED 442.3 'uW/cm^2/nm' 2 BU 1 OPTIC2
   9.8 3.0479e-003  1.44
ED 489.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   8.8 2.9961e-003  1.43
ED 700.0 'uW/cm^2/nm' 2 BU 1 OPTIC2
   8.4 2.1721e-003  1.36
ED 555.5 'uW/cm^2/nm' 2 BU 1 OPTIC2
   13.8 3.5248e-003  1.39
ED 665.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   12.8 2.1400e-003  1.40
ED 682.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   13.4 2.3125e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT