# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0012 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 053 - calculated from the manual values
#
ED 411.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   15.6 2.9587e-003  1.52
ED 443.3 'uW/cm^2/nm' 2 BU 1 OPTIC2
   11.5 2.9640e-003  1.44
ED 489.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   15.1 2.9915e-003  1.43
ED 510.5 'uW/cm^2/nm' 2 BU 1 OPTIC2
   13.8 3.3844e-003  1.42
ED 555.3 'uW/cm^2/nm' 2 BU 1 OPTIC2
   17.6 3.3920e-003  1.39
ED 665.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   11.5 2.0721e-003  1.40
ED 682.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   13.4 2.2156e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT