# CALIBRATION FILE WRAPPER
#
INSTRUMENT SATDAT '' 6 AS 0 NONE

# Modify the second field to match the S/N on the unit.
#
SN 0010 '' 4 AI 0 COUNT

#
# Now you need a sensor definition line for each channel logged by 
# the STOR-DAT.  This section describes the data block in the frame.
#
#ED sensor OCI-200  S/N 052 - calculated from the manual values
#
ED 411.7 'uW/cm^2/nm' 2 BU 1 OPTIC2
   17.3 2.8992e-003  1.52
ED 442.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   9.2 3.2303e-003  1.44
ED 489.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   8.3 2.9198e-003  1.43
ED 509.1 'uW/cm^2/nm' 2 BU 1 OPTIC2
   9.8 3.1876e-003  1.42
ED 555.8 'uW/cm^2/nm' 2 BU 1 OPTIC2
   15.5 3.5667e-003  1.39
ED 665.0 'uW/cm^2/nm' 2 BU 1 OPTIC2
   10.7 2.1851e-003  1.40
ED 682.9 'uW/cm^2/nm' 2 BU 1 OPTIC2
   14.2 2.2911e-003  1.38
ED NONE '' 2 BU 0 NONE
#
# STOR-DAT tacks on a time tag to the end of each frame.
#
TIME TAG 's' 4 BU 0 TIME2
M S 'ms' 2 BU 0 COUNT